Frying pans
Moderators: karadekoolaid, THE MOD TEAM, Stokey Sue, Gillthepainter
24 posts
• Page 1 of 2 • 1, 2
Frying pans
OH is our chef. He is asking for recommendations for a good quality frying pan that is guaranteed to be OK for temperatures up to 200 degrees C.
We have non-stick pans by Circulon but they start to stick and become denatured after a short while. That's because (he says) the hob temperature can exceed 180 deg C for a few mins and the damage is done. Most pans are only advised/guaranteed up to 180 deg C.
We used to have a fab pan by Prestige in their French Provincial range (stainless steel with wooden handles) but that and the others are long gone (wedding presents in 1976). We can't find anything like that on the market now.Most pans are non-stick these days and we don't want that any more.
We have non-stick pans by Circulon but they start to stick and become denatured after a short while. That's because (he says) the hob temperature can exceed 180 deg C for a few mins and the damage is done. Most pans are only advised/guaranteed up to 180 deg C.
We used to have a fab pan by Prestige in their French Provincial range (stainless steel with wooden handles) but that and the others are long gone (wedding presents in 1976). We can't find anything like that on the market now.Most pans are non-stick these days and we don't want that any more.
- Stokey Sue
- Posts: 8629
- Joined: Fri Apr 27, 2012 2:02 pm
- Location: Stoke Newington, London
Re: Frying pans
I currently have gas but I have said I will never buy another coated frying pan again
My plan is tri ply stainless steel, that s/s inside and out with a layer of other metal sandwiched between the two sheets of steel, they are much better than the kind where you can see a separate disk on the bottom, and most work on all hobs
They now make 5 ply, same idea, not sure if it’s any better
Good makes are All Clad and Le Creuset, but there are lots about now though some have non stick so you have to read the description
This is John Lewis own brand, as an example
https://www.johnlewis.com/john-lewis-pa ... lsrc=aw.ds
My plan is tri ply stainless steel, that s/s inside and out with a layer of other metal sandwiched between the two sheets of steel, they are much better than the kind where you can see a separate disk on the bottom, and most work on all hobs
They now make 5 ply, same idea, not sure if it’s any better
Good makes are All Clad and Le Creuset, but there are lots about now though some have non stick so you have to read the description
This is John Lewis own brand, as an example
https://www.johnlewis.com/john-lewis-pa ... lsrc=aw.ds
Re: Frying pans
I don't recall ever seeing anything on either a label or buying guide about the temperature a frying pan gets to while frying. Most temperature guides seem to be for using a non-stick pan in the oven.
I recently gave up on a ceramic Green pan, as it was neither non-stick nor easy to clean, and on the advice of a friend who'd tried them, bought two sizes of these from Amazon, which are oven safe to 260C, so might be better on the hob too. My thinking was they were cheap enough to replace more frequently, if necessary:
https://smile.amazon.co.uk/dp/B089ZMS1Y ... ct_details
Sorry - just noticed you said you didn't want non-stick this time. I'll leave the post in case anyone else is interested in a recommendation.
I recently gave up on a ceramic Green pan, as it was neither non-stick nor easy to clean, and on the advice of a friend who'd tried them, bought two sizes of these from Amazon, which are oven safe to 260C, so might be better on the hob too. My thinking was they were cheap enough to replace more frequently, if necessary:
https://smile.amazon.co.uk/dp/B089ZMS1Y ... ct_details
Sorry - just noticed you said you didn't want non-stick this time. I'll leave the post in case anyone else is interested in a recommendation.
Traditional home baking, and more:
http://mainlybaking.blogspot.co.uk/
http://mainlybaking.blogspot.co.uk/
Re: Frying pans
Over the past year we’ve bought two frying pans and a wok which aren’t advertised as non stick, but are. Got them from John Lewis black ceramic with metal handles, which OH loves, being so useful for frittata. Not at home at the moment but she’s certain temperature is up to 220. However, JL only do plastic handles now.
As washer upper when OH cooks, apart from the metal stud on the inside of the pan holding the handle, they clean easily.
As washer upper when OH cooks, apart from the metal stud on the inside of the pan holding the handle, they clean easily.
- liketocook
- Posts: 2386
- Joined: Wed Apr 25, 2012 8:12 pm
Re: Frying pans
I have 2 Pro Cook frying pans and love them. This one https://www.procook.co.uk/product/proco ... 0c8a87cc0e and one like this but deeper https://www.procook.co.uk/product/proco ... 3e51a34830 both are safe to 260C
Re: Frying pans
You may know that my OH works for ProCook. He says their uncoated pans are guaranteed safe up to 260C
He really recommends the Elite Tri-ply range, but says they're all fine ... https://www.procook.co.uk/shop/cookware ... nsskillets
Although they're shown here in sets, all are available individually.
NB ... he says one of the problems with coated pans is that if you use olive oil (even just the once) in them they can lose their 'non-stick' ness.
Despite having been told this by Him Who Knows, I can cofirm that this is true
He really recommends the Elite Tri-ply range, but says they're all fine ... https://www.procook.co.uk/shop/cookware ... nsskillets
Although they're shown here in sets, all are available individually.
NB ... he says one of the problems with coated pans is that if you use olive oil (even just the once) in them they can lose their 'non-stick' ness.
Despite having been told this by Him Who Knows, I can cofirm that this is true
- Lusciouslush
- Posts: 1735
- Joined: Thu May 03, 2012 10:35 am
Re: Frying pans
I've recommended them before.....Scanpans - absolutely brilliant!
I have various frying pan sizes plus roasters which get hammered - hob & oven, they're indestructible & still going strong after years of use........
https://www.scanpan.com/
They also wash like a dream!
I have various frying pan sizes plus roasters which get hammered - hob & oven, they're indestructible & still going strong after years of use........
https://www.scanpan.com/
They also wash like a dream!
- Stokey Sue
- Posts: 8629
- Joined: Fri Apr 27, 2012 2:02 pm
- Location: Stoke Newington, London
Re: Frying pans
Suffs wrote:NB ... he says one of the problems with coated pans is that if you use olive oil (even just the once) in them they can lose their 'non-stick' ness.
Despite having been told this by Him Who Knows, I can confirm that this is true
I think that may be what did for my small Greenpan fry pan, the deep chef pan and the shallow casserole are holding up better, probably because most cooking in them is at least finished by simmering liquid in them. There are different non-stick compounds, and I guess some would be affected more than others
I find that if they [eta the ceramic finish pans, not generic non-stick] need a deep clean Bar Keeper's Friend is the best thing, following a good soak
Re: Frying pans
He says it's to do with the lower smoke point of olive oil ... and he says that apparently the same is true of the 'spray oils' like One cal etc,he has been told that even on stainless steel these spray oils leave a very thin layer 'welded' to the pan surface which can cause 'sticking'.
ProCook have a very comprehensive User Guide and Care Instructions ... it should come automatically with online orders ... if not email and ask for a copy ... or ask in one of the shops. The staff are lovely
ProCook have a very comprehensive User Guide and Care Instructions ... it should come automatically with online orders ... if not email and ask for a copy ... or ask in one of the shops. The staff are lovely
Re: Frying pans
I think OH is leaning towards the Pro Cook range. He thanks you for the info and recommendations.
Re: Frying pans
I have a very expensive All Clad frying pan, and its rarely used. Although I love the rest of my All Clads ( lucky me, I have another 4). I follow whichever famous chef it was who said buy cheap and chuck often as far as frying pans are concerned. I follow the same principle with duvets and pillows .
- miss mouse
- Posts: 712
- Joined: Fri Jul 06, 2012 11:08 pm
Re: Frying pans
I have come to the conclusion that Ikea are as good as anything.
Re: Frying pans
I have the IKEA 365 range and love them.
I just bought a new pan so will keep in mind what suffs said about the oil sprays.
I just bought a new pan so will keep in mind what suffs said about the oil sprays.
- Earthmaiden
- Posts: 5297
- Joined: Fri Mar 27, 2020 11:58 am
- Location: Wiltshire
Re: Frying pans
I've been very pleased with IKEA too and would buy from there again. Pro cook are very good I think too.
Had no idea about the oil. Explains a lot!
Had no idea about the oil. Explains a lot!
Re: Frying pans
I've had Circulon pans for years and had no problems with the non-stick coating. I use olive oil most of the time and it doesn't seem to have affected them - they are as 'non-sticky' as ever and I really like them.
Re: Frying pans
.
I'm not a big nonstick coating fan. I find that it just doesn't last or stand up to the way I cook. Can't be buying and tossing cookware - pointless and wasteful on so many levels.
I am a big cast iron cookware and Le Creuset fan, tho, and have several cast iron frying pans - including favourite ones with black interiors and wood handles - that I use all the time and they just can't be beaten for quality and versatility at all temperatures. I also have quite a few very ancient and very blackened seasoned cast iron pans that are magnificent too.
A good cast iron pan is every bit if not better than a dedicated nonstick pan IMO.
My other go to frying pans are a steel flat wok that has become seasoned over time and is basically non stick, and ditto a lined copper sautee pan with a brass handle that is wonderful.
I'm not a big nonstick coating fan. I find that it just doesn't last or stand up to the way I cook. Can't be buying and tossing cookware - pointless and wasteful on so many levels.
I am a big cast iron cookware and Le Creuset fan, tho, and have several cast iron frying pans - including favourite ones with black interiors and wood handles - that I use all the time and they just can't be beaten for quality and versatility at all temperatures. I also have quite a few very ancient and very blackened seasoned cast iron pans that are magnificent too.
A good cast iron pan is every bit if not better than a dedicated nonstick pan IMO.
My other go to frying pans are a steel flat wok that has become seasoned over time and is basically non stick, and ditto a lined copper sautee pan with a brass handle that is wonderful.
Last edited by ZeroCook on Sat Jan 29, 2022 9:00 am, edited 1 time in total.
- Pepper Pig
- Posts: 4920
- Joined: Thu Feb 21, 2013 5:52 pm
- Location: North West London
Re: Frying pans
I've had to give up on all my cast iron stuff unless I have elves helping me. Even when they're not painful my hands won't lift and grip properly any more. I'm suffering at the moment from having to chop the marmalade peel by hand. I'm back in splints
Re: Frying pans
.
That's tough, PP. The thin copper or steel sautee type pans are pretty lightweight. Sounds like you need some elves to chop your marmalade peel
PS If you boil the orange peels before chopping, makes the job loads easier
That's tough, PP. The thin copper or steel sautee type pans are pretty lightweight. Sounds like you need some elves to chop your marmalade peel
PS If you boil the orange peels before chopping, makes the job loads easier
Re: Frying pans
i have a small le creuset and another bigger cast iron, the larger is heavy but cope-able with for me. i take plates to it rather than the other way round - and i wouldn't dream of tossing pancakes with it.
i have a greenpan wok and sauté pan and have had no problem with them becoming non stick even though i use light olive oil in them but maybe that's because other, wetter ingredients go in after the frying has been done and i don't usually use them at highest temperatures. i love them.
i have a greenpan wok and sauté pan and have had no problem with them becoming non stick even though i use light olive oil in them but maybe that's because other, wetter ingredients go in after the frying has been done and i don't usually use them at highest temperatures. i love them.
24 posts
• Page 1 of 2 • 1, 2
Return to Food Chat & Chatterbox
Who is online
Users browsing this forum: Majestic-12 [Bot] and 19 guests